EPEVER SOLAR Demand CONTROLLER Set up: TRACER AN Sequence CONTROLLE

EPEVER SOLAR Demand CONTROLLER Set up: TRACER AN Sequence CONTROLLE

Blog Article

The EPEVER Tracer AN Series Solar Cost Controller is a very successful solar controller suitable for off-grid photo voltaic units. Determined by multiphase synchronous rectification engineering, it ensures optimized Electrical power conversion and program balance for a wide array of photovoltaic (PV) apps.

Critical Capabilities from the EPEVER Tracer AN Series Controller
The Tracer AN series utilizes EPEVER Solar Charge Controller engineering for excellent solar Strength harvesting. Essential capabilities include things like:

Multiphase Synchronous Rectification (MSR) for enhanced Electricity conversion.
Highly developed MPPT Algorithm with >ninety nine% performance.
Twin-Phase Charging for Improved battery everyday living.
LCD Display with genuine-time info monitoring.
Numerous Load Command Modes together with handbook and timer.
In depth Digital Protections versus overcharging, about-discharging, small circuits, and reverse polarity.
Action-by-Action Information to Organising the EPEVER Tracer AN Sequence Controller
1. Unboxing and Preparing the Controller
Ensure all components are included: Tracer AN device, temperature sensor, interaction cables, and consumer guide.
Verify the model selection and voltage ratings match your photo voltaic panel and battery technical specs.
two. Mounting the Cost Controller
Pick a nicely-ventilated, dry place close to the battery lender.
Safe the Tracer AN controller using the offered mounting brackets.
Maintain suitable clearance for warmth dissipation.
three. Wiring the Photo voltaic Charge Controller
Warning: Normally abide by good protection protocols and make sure the technique is driven off prior to connecting components.

Move one: Link the battery terminals towards the demand controller (beneficial to positive, adverse to detrimental).
Stage 2: Connect the photo voltaic panel array towards the PV enter terminals.
Move three: Hook up the load terminals if using a immediate load relationship.
Step four: Double-Test all connections for polarity and tightness.
four. Configuring the Controller Settings
Ability to the controller by connecting the battery very first.
Use the Liquid crystal display Screen to navigate the configurations menu.
Configure:
Battery Kind: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Command Modes: Guide, timer, light Regulate.
five. Checking and Data Logging
The Tracer AN Sequence supports actual-time monitoring utilizing the MT50 distant meter.
Info can be logged by means of the RS485 conversation port making use of software which include Photo voltaic Station Laptop.
Remote checking is feasible Using the EPEVER WiFi module.
6. Troubleshooting Frequent Troubles
Issue 1: No Ability Output

Test battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Challenge two: Above-Voltage Protection

Confirm the solar array’s voltage ranking.
Alter method parameters if essential.
Problem 3: No Battery Charging

Inspect PV wiring for continuity.
Validate MPPT configurations during the menu.
Great things about the Tracer AN Collection with MSR Technologies
The multiphase More info synchronous rectification technological know-how makes certain:

Bigger Performance: Lessened Electricity losses all through conversion.
Increased Trustworthiness: Secure overall performance beneath variable masses.
Lengthier Battery Everyday living: Constant and correct charging profiles.
Conclusion
The EPEVER Solar Cost Controller with multiphase synchronous rectification engineering is really an Excellent option for optimizing solar power technology and lengthening battery daily life. By adhering to the above mentioned set up guideline, buyers can guarantee utmost performance and method longevity.