EPEVER Photo voltaic Cost CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
EPEVER Photo voltaic Cost CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Photo voltaic Charge Controller is a highly successful photo voltaic controller designed for off-grid solar units. Based on multiphase synchronous rectification engineering, it guarantees optimized Electricity conversion and process steadiness for a variety of photovoltaic (PV) applications.
Key Attributes from the EPEVER Tracer AN Series Controller
The Tracer AN series utilizes EPEVER Solar Charge Controller engineering for outstanding photo voltaic energy harvesting. Key attributes consist of:
Multiphase Synchronous Rectification (MSR) for improved Power conversion.
Sophisticated MPPT Algorithm with >99% efficiency.
Twin-Phase Charging for Increased battery lifetime.
Liquid crystal display Exhibit with authentic-time knowledge checking.
A number of Load Management Modes like guide and timer.
Extensive Electronic Protections against overcharging, over-discharging, short circuits, and reverse polarity.
Phase-by-Move Tutorial to Organising the EPEVER Tracer AN Collection Controller
one. Unboxing and Making ready the Controller
Ensure all factors are bundled: Tracer AN device, temperature sensor, interaction cables, and consumer manual.
Verify the product range and voltage rankings match your solar panel and battery specs.
2. Mounting the Demand Controller
Pick out a properly-ventilated, dry locale near the battery bank.
Secure the Tracer AN controller using the delivered mounting brackets.
Retain suitable clearance for heat dissipation.
3. Wiring the Photo voltaic Cost Controller
Caution: Always adhere to proper protection protocols and make sure the method is powered off prior to connecting components.
Action 1: Connect the battery terminals into the demand controller (optimistic to good, detrimental to negative).
Move two: Join the photo voltaic panel array for the PV input terminals.
Action 3: Join the load terminals if utilizing a direct load relationship.
Action 4: Double-Look at all connections for polarity and tightness.
four. Configuring the Controller Settings
Ability about the controller by connecting the battery very first.
Utilize the Liquid crystal display Show to navigate the configurations menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Manage Modes: Handbook, timer, mild control.
five. Monitoring and Info Logging
The Tracer AN Series supports authentic-time monitoring using the MT50 distant meter.
Information can be logged by means of the RS485 conversation port employing software program for example Solar Station PC.
Distant monitoring can be done With all the Read more EPEVER WiFi module.
6. Troubleshooting Widespread Problems
Difficulty 1: No Power Output
Check out battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Difficulty 2: Over-Voltage Defense
Verify the photo voltaic array’s voltage score.
Regulate program parameters if necessary.
Challenge three: No Battery Charging
Inspect PV wiring for continuity.
Confirm MPPT options in the menu.
Advantages of the Tracer AN Series with MSR Know-how
The multiphase synchronous rectification technologies makes certain:
Greater Effectiveness: Reduced Strength losses throughout conversion.
Improved Trustworthiness: Steady effectiveness below variable hundreds.
Lengthier Battery Daily life: Consistent and precise charging profiles.
Summary
The EPEVER Solar Cost Controller with multiphase synchronous rectification technological know-how is definitely an Fantastic choice for optimizing solar power era and increasing battery lifestyle. By pursuing the above mentioned setup information, buyers can make certain greatest performance and method longevity.